FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [September 2012 Threads] Raising privilege causes a hard faultPosted by Tamir Michael on September 24, 2012 Hello,
First I would like to apologize for posting a question that is not completely associated with FreeRTOS. I am working with a LPC1788 + FreeRTOS MPU, and attempting to make lwIP fit it as well. However, I notice that raising privilege (when exiting a critical section - vPortExitCritical) causes a hard fault. The CPU is in thread mode/unprivileged/PSP (it is not that a SVC is launched in an SVC), BASEPRI = 0x28, PRIMASK = 0, priority of SVC is 31. Any ideas?
Thanks in advance.
RE: Raising privilege causes a hard faultPosted by Richard on September 24, 2012 There was a thread about using FreeRTOS-MPU very recently here. I don't seem to be able to find it because the search on this forum is not easy, and it has not been indexed by Google yet on in the archive (on the FreeRTOS site).
The conversation continued on the lwIP mailing list though. I would recommend reading it because it pointed out some issues with lwIP that would make it hard to use with an MPU (as stack memory is shared across threads).
Regards.
RE: Raising privilege causes a hard faultPosted by Tamir Michael on September 24, 2012 Richard,
Thanks for your reply. I managed to integrate lwIP with FreeRTOS MPU. I encountered none of the problems you mentioned. I manage to connect to a remote server using the socket interface, send some data and close the connection. However, I cannot share the code as it is a prototype for a commercial product. Thanks for your support.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|