FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [September 2008 Threads] LM3S6965 Eval RevC OLED did not workPosted by Bill Yang on September 2, 2008 Hi, Is someone knows the LM3S6965 RevC Eval board has no display functionility since the board has switched to RevC? I used the LM3S6965 RevC Eval board to run the demo from FreeRTOS (LM3Sxxxx TCP/IP Keil version) and followed the instructions to replace the Osram128x64x4 with the rit128x96x4 in every where in the project. But OLED display is still not work. Does any one know how to fix this problem? Bill Yang
RE: LM3S6965 Eval RevC OLED did not workPosted by Richard on September 3, 2008 I presume you are able to step through the code in the debugger so know that the application is actually running.
I don't have a Rev C board here unfortunately. Can you run some of the Luminary demo code to check that the display works with their code, then see if they do anything different in the initialisation.
Regards.
RE: LM3S6965 Eval RevC OLED did not workPosted by David Gesswein on September 3, 2008 I have the changes I made to make FreeRTOS 4.7.2 work on a rev C board on my FreeRTOS under Linux page. http://www.pdp8.net/other/freertos_linux/install.shtml The changes needed in patch (context diff) format are http://www.pdp8.net/other/freertos_linux/rev_c_patch.txt + is lines added, - is lines deleted ! is lines changed. The lines after *** #,# *** are the old file and lines and after --- #,# --- are the new file.
RE: LM3S6965 Eval RevC OLED did not workPosted by Bill Yang on September 5, 2008 Thanks all, I figured out what is wrong with the OLED display. The revision of rit128x96x4.c file need to be updated to latest revision. After I updated the revision of rit128x96x4.c, it works. Thanks again. Bill Yang
RE: LM3S6965 Eval RevC OLED did not workPosted by Zhibin Zhang on September 18, 2008 Hi Barry,
For this build, can you give us some example on how you using uIP stack into your port?
Could you please briefly explain how you start, which file you have changed in order to use uIP....
It will help me a lot to learn how to use uIP and FreeRTOS. It will be a good example. How you modify some function in low level, how you integrate the drivers, and how you implement in the application level....
RE: LM3S6965 Eval RevC OLED did not workPosted by Dave on September 18, 2008 There already is a full working example for uIP for the LM3S6965 in the FreeRTOS download.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|