FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [November 2011 Threads] KINETIS K60N512 - IAR Doesn´t run from FlashPosted by rzubillaga on November 11, 2011 Hi every body,
i have downloaded and compiled succesfully the project contained in "FreeRTOSv7.0.2" called "CORTEX_Kinetis_K60_Tower_IAR" -> Blinky.
In this case i´m not able to run it from flash directly, i have to be conected to IAR and Debugging.
I have downloaded, compiled and verified this with the Examples provieded in Freescale web "KINETIS512_SC". The configuration provided with this examples works perfectly from Flash without been conected to IAR_IDE. As it should be.
Then, i have checked al the project option from one (freertos_uip) to the other (Blinky), and just in case i have copied the "ICF" file too, but i don´t know why, but it doesn´t work.
IAR Versión - 6.30 (i have experienced problems with 6.21 and PEmicro Flash downloader) Debugger/programmer -> The oine integrated in K60N512 board -> PEmicro OSDebug.
Does any body know smthg around this???
Thanks, Zubi
RE: KINETIS K60N512 - IAR Doesn´t run from FlashPosted by Richard on November 14, 2011 Are you saying it runs from RAM, but not Flash?
If so, look at how your interrupt vectors are mapped, and how they are configured in the start up code. Also read back the flash image to ensure it is correct, and programmed into the correct locations. Look at the asm code generated and ensure it is calling functions in flash, and not RAM, in case your linker script is wrong.
Regards.
RE: KINETIS K60N512 - IAR Doesn´t run from FlashPosted by rzubillaga on November 16, 2011 Hi richard,
as i posted above, the project used is the original one. It runs from RAM and from FLASH, but from Flash only while IDE is connected ....
At the momement i cant not check all this things that you suggest. I will try to do it ASAP.
Any way, as the PRJ is the original one, i think that it shouldn´t be only a problem for me, but for the rest of the users too...
Thanks, Zubi
RE: KINETIS K60N512 - IAR Doesn´t run from FlashPosted by Ander on December 2, 2011 Hello everybody:
I have the same problem that rzubillaga has. I download both demos, blinky and full without any changes and I if the debugger is conected they work fine, but if I disconect the debugger, the demo doesn´t start.
I have tried using the icf of the freertos demo in another example and that example starts from flash correctly without the debugger. so what could I do?
When downloading the full demo I read the following message that is suspicious:
"Skipping flash loading pass because there is no data in the designated range: 0x10000000-0x13FFFFFF. "
regards
RE: KINETIS K60N512 - IAR Doesn´t run from FlashPosted by Richard on December 8, 2011 Search the source files for every instance of printf(), remove them all (and there are a lot in the Freescale provided start up files - which is a really weird thing to do), and it will work.
Alternatively, redirect printf() somewhere else, like a UART.
Regards.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|