FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [November 2006 Threads] STR75x: only one task runsPosted by Nobody/Anonymous on November 24, 2006 Hello everybody:
At the moment I try to change the demo application of FreeRtos and STR75x / IAR.
I write a new main file and create two task with diffenent prioritys. Then I start the scheduler.
Both Task's were created sucessfully but only the task with the higher priority runs.
Have I overlocked something?
I also took the main file of the demo and delete all entries, exept the init and the start scheduler, and added my create tasts. And again the same error.
Have anybody an idea or experience?
Thanks a lot!
RE: STR75x: only one task runsPosted by Nobody/Anonymous on November 24, 2006 Does your high priority task ever block? The lower priority task will only run if the higher priority task cannot continue.
Try adding "vTaskDelay( 2 )" to the higher priority task. This will cause it to block for 2 ticks on each loop.
RE: STR75x: only one task runsPosted by Nobody/Anonymous on November 30, 2006 Thanks it works!
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|