FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [March 2014 Threads] hardfault inside vPortYield() for stm32Posted by karthik366 on March 25, 2014 i am using stm32l152cb MCU and created 3 tasks in freertos and the execution goes to hardfault and when i checked it in call stack it shows it is due to the vPortYield() function at portNVICINTCTRLREG = portNVICPENDSVSET_BIT; how to avoid this exception.I configured the port priorities according to the freertos page(http://www.freertos.org/RTOS-Cortex-M3-M4.html)
void vPortYield( void )
{
/* Set a PendSV to request a context switch. */
portNVICINTCTRLREG = portNVICPENDSVSET_BIT;--->shows hardfault here
/* Barriers are normally not required but do ensure the code is completely
within the specified behaviour for the architecture. */
__DSB();
__ISB();
}
Regards
hardfault inside vPortYield() for stm32Posted by rtel on March 25, 2014 In this the only thing I can suggest is that maybe the CPU is in an unprivileged mode when the function is called.
You seem to be experiencing lots of varied problems that should just not occur. Where are you getting your start up code from? Did you base your application on one of the many pre-configured and known good examples that are provided for you?
Regards.
hardfault inside vPortYield() for stm32Posted by karthik366 on March 25, 2014 yes i downloaded the demo freertos code provided for the stm32l152xb series from freertos website and developed my application on it.i'm sorry i never checked the modes and i am not much aware of it, i'm just using the CMSIS stdperipheral libraries and the freertos api's from the demo code.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|