|
|||||||||||||||
FreeRTOS Support ArchiveThe FreeRTOS support forum is used to obtain active support directly from Real Time Engineers Ltd. In return for using our top quality software and services for free, we request you play fair and do your bit to help others too! Sign up to receive notifications of new support topics then help where you can.
Loading
No debugging symbols and execution stops at "HardFaultException(void)" function-IAR workbenchPosted by aruns06 on January 1, 2015 Hi, I am trying to run a demo freeRTOS project CORTEXSTM32F103IAR. I was able to compile and upload it in to STM32F1 discovery board. (http://www.st.com/web/en/catalog/tools/FM116/SC959/SS1532/PF250863?sc=stm32-discovery). In normal case I have to press the ">>>" go button to start the execution. But in this example the soon after the uploading is completed, it is going to the execution mode, not giving the room to press the go button. When I "Break" the execution, it stops at a function called void HardFaultException(void). The execution never comes out of this function. Any suggestions??? Regards, Arun.S No debugging symbols and execution stops at "HardFaultException(void)" function-IAR workbenchPosted by davedoors on January 1, 2015 I expect it is trying to run to main() then crashing before it ever gets there. Look in the debug options for the project and uncheck 'run to main' then try again. You should then be able to step through the code to see where it crashes.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|
|||||||||||||||
NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.
Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019
Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.
View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.
FreeRTOS and other embedded software careers at AWS.
