FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [February 2016 Threads] FreeRTOS+TCP with Xilinx ethernetlite ...Posted by debugasm on February 17, 2016 Until now I used FreeRTOS using "lwip 1.4.1", but I encountered
problems. I'm going to try FreeRTOS+TCP but for now there are no
drivers for Xilinx "ethernetlite".
You have already sketched a driver to start ?
Reading code of FreeRTOS+TCP I have not found a way to restart the
network interface with a new MAC address and IP configuration.
Is there an example ?
Thanks very much.
debugasm
FreeRTOS+TCP with Xilinx ethernetlite ...Posted by rtel on February 17, 2016 While we do have a port for the Zynq, you are right in that it is not using the Ethernet Lite IP. I'm guessing that, if you are using Eithernet Lite, then you are also using the Microblaze. Xilinx provide drivers themselves, and a description of how these drivers can be stitched into the FreeRTOS+TCP porting layer is provided on the following link: http://www.freertos.org/FreeRTOS-Plus/FreeRTOSPlusTCP/FreeRTOSTCPPorting.html
FreeRTOS+TCP with Xilinx ethernetlite ...Posted by debugasm on February 17, 2016 Thanks, I follow your link to porting driver.
How reinizialize FreeRTOs+TCP with new MAC and IP Address after previous init and start ?
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|