Hi, I need to build the LPC2106 example using Sourcery CodeBench Lite 2013.05-24 and I receive an error:

arm-none-linux-gnueabi-gcc -Wall -Wextra -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wunused -D RUNFROMRAM -DGCCARM7 -I. -I../../Source/include -I. -I../../../FreeRTOS/Source/portable/RVDS/ARM7LPC21xx -I../Common/include -mcpu=arm7tdmi -T -fomit-frame-pointer -fno-strict-aliasing -fno-dwarf2-cfi-asm ../../Source/portable/GCC/ARM7LPC2000/portISR.o serial/serialISR.o main.o serial/serial.o ParTest/ParTest.o ../Common/Minimal/integer.o ../Common/Minimal/flash.o ../Common/Minimal/PollQ.o ../Common/Minimal/comtest.o ../Common/Minimal/flop.o ../Common/Minimal/semtest.o ../Common/Minimal/dynamic.o ../Common/Minimal/BlockQ.o ../../Source/tasks.o ../../Source/queue.o ../../Source/list.o ../../Source/portable/MemMang/heap2.o ../../Source/portable/GCC/ARM7LPC2000/port.o -nostartfiles boot.s -Xlinker -ortosdemo.elf -Xlinker -M -Xlinker -Map=rtosdemo.map /home/catalin/CodeSourcery/SourceryCodeBenchLiteforARMGNU_Linux/bin/../lib/gcc/arm-none-linux-gnueabi/4.7.3/../../../../arm-none-linux-gnueabi/bin/ld: cannot open linker script file -fomit-frame-pointer: No such file or directory collect2: error: ld returned 1 exit status make: *** [rtosdemo.elf] Error 1

The FreeRTOS release is 8.0.0.

Is there someone that solved this problem (or know an suitable solution)?

Thank you !

Your makefile or whatever is generating that link command is not inserting the name of the desired linker script, leaving just a blank in it's place, so that gcc is trying to interpret whatever comes after "-T" as the filename of the linker script; in this case "-fomit-frame-pointer". Probably you just have to define the name of the linker script. In the default LPC2106 demo on freertos v8, it's "LDSCRIPT=lpc2106-rom.ld".

That demo (which is very old) has multiple build configurations (RAM/ROM, THUMB/ARM) etc., and is build using the batch files that exist in the same directory as the makefile. The batch files set the correct linker script and a few other command line options for the build configuration selected. The information should be documented on the webpage for that demo.

Regards.