FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [November 2006 Threads] Softec HCS12 starter kitPosted by Nobody/Anonymous on November 11, 2006 Sorry to bother you guys, but I need help loading a project into the starter kit.
I couldn't get me assembly code to run, so I went back to the examples.
If I start codewarrior then open the Softec ADC.mcp example, choose Softec target
Click Project->Debug, it loads the example program.
If I start a new project, choose absolute asembly, simulator and PK-HCS12 target,
Then make no changes to the "framework" main.asm file
Make file compiles, but debug fails to connect to target.
Thanks for any ideas.
JohnP
RE: Softec HCS12 starter kitPosted by Nobody/Anonymous on November 11, 2006 So you are saying the FreeRTOS demo works. But if you make a new project (that does not contain FreeRTOS) then you cannot get it to work? Sounds like a tech support question for CodeWarrior support? Or have I missed the point?
RE: Softec HCS12 starter kitPosted by Nobody/Anonymous on November 11, 2006 Sorry, nothing to do with RTOS. I'm porting my HC11 code, and bought the Softec starter kit to use as an emulator.
After fighting it for a couple days, I googled the starter kit, and this page popped up with a photo of the Softec board I'm using, so I thought maybe you could show me what I was doing wrong.
I emailed Softec, posted to their forum, posted on the Yahoo HC12 forum, and the Freescale forum. No replies yet.
I can't get the simplest assembly program to load, though it will load the Softec ADC example. Their example is written in C. It reads a pot, then displays the value on LED's connected to PortB.
The simplest assembly program would be their framework code with no changes (where it says "insert your assembly code here".
It compiles and executes on the CodeWarrior True-Time simulator, but won't connect to the target when I switch to target mode.
It gives a communication error. The PC's device manager shows it's connected. Uninstalling/reinstalling the cable is no help.
Then I go back to the Softec example, and it loads with no problem.
JohnP jpizzuto@jandssafeguard.com
RE: Softec HCS12 starter kitPosted by Nobody/Anonymous on November 12, 2006 Found the problem. Compared the Debugger files named SofTec.ini
They were different, so I replaced the nonworking one with the working example.
I posted a detailed explanation on the Softec forum:
http://www.softecmicro.com/forum/showthread.php?s=&postid=1471#post1471
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|