FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [November 2006 Threads] Problem with uIPPosted by Fabrizio on November 3, 2006 Hi,
I've just finish to port freertos on STR91x using Rowley CrossStudio (GCC).
The RTOS works at 100% with all demonstration tasks but i've a problem with uIP.
When i link the ethernet cable, the port seems to initialize correctly , but when i
try to "ping" with my board i don't receive any reply by it.
I used uIP of the IAR Project and the IP address is setting correctly.
There are particular changes to make for compile uIP under GCC?
Thanks.
Fabrizio
RE: Problem with uIPPosted by Nobody/Anonymous on November 3, 2006 There is a uIP GCC demo in the download, but for an older version of uIP. Look in the Demo\uIP_Demo_Rowley_ARM7 folder.
In particular look at uip_arp.h and uip.h. These both use __attribute__ to pack and align data. This is GCC specific (other compilers use different syntax that is) so might be what your problem is.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|