FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [March 2017 Threads]
Hello,
I run FreeRTOS+TCP Labs Build 150114 example and sniffing DHCP packet with wireshark I see many packet with [Malformed Packet], after few hours (lease time is 10 minutes for testing) the ip address of the board is set to default ip address.
Someone have the some problem ?
Thank you
Massimo
Hi Massimo, you are using one of the oldest Labs releases (from January 2015). The current release is 160919.
I recommend that you upgrade your project to that version. You may also upgrade the kernel (to 9.0.0) but that isn't necessary.
But as I haven't seen malformed DHCP packets yet, could you attach a small PCAP file that shows some of those packets?
You can filter DHCP packets with "udp.port==67"
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.