FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [January 2005 Threads] IAR BoardPosted by Nobody/Anonymous on January 21, 2005 hi everibody,
I'm using the IAR KickStart Card for Philips LPC2106, can i use the Freertos?
Thanks
Leo
RE: IAR BoardPosted by Richard on January 21, 2005 Hi,
Did you recently send me an email regarding the KickStart board? If so can you send it again (address from WEB site) as I some how managed to miss place it - thanks.
The FreeRTOS download currently has ports for the LPC2000 series using CrossWords, plain GCC and Keil - but not IAR. However, there is an IAR port for the Atmel SAM7S - which is also has an ARM7 core so is very similar.
Using IAR with the LPC2000 would require setting up a project. This would be a combination: The setup and syntax as per the SAM7 port, with the peripheral configuration as per the LPC2000 ports.
So, having rambled for a while, the quick answer is Yes, but not "straight out of the box".
Regards, Richard.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|