Real time embedded FreeRTOS RSS feed 
Homepage FreeRTOS+ Products FreeRTOS Labs Support Forum Contact / Enquiries
FreeRTOS+UDP was removed from the FreeRTOS kernel download from FreeRTOS V10.1.0. See the FreeRTOS+TCP stack, which can be configured for UDP only use, as an alternative.

FreeRTOS_inet_addr()

[FreeRTOS Embedded IP Stack API]

FreeRTOS_sockets.h
uint32_t FreeRTOS_inet_addr( const uint8_t * pucIPAddress );
		

FreeRTOS_inet_addr() is a function that converts an IP address expressed in decimal dot notation (for example "192.168.0.100") into a 32-bit IP address in network byte order.

FreeRTOS_inet_addr_quick() is a macro that converts an IP address expressed as four separate numeric octets (for example 192, 168, 0, 100) into a an IP address expressed as a 32-bit number in network byte order

FreeRTOS_inet_addr_quick() is the preferred method because of its smaller size and faster execution. FreeRTOS_inet_addr() is provided because it conforms to the expected Berkeley sockets function prototype.

ipconfigINCLUDE_FULL_INET_ADDR must be set to 1 in FreeRTOSIPConfig.h for FreeRTOS_inet_addr() to be available. FreeRTOS_inet_addr_quick() is always available.

Parameters:

pucIPAddress   A pointer to a string that contains the IP address being converted in decimal dot format.

Returns:

If the format of the string pointed to by the pucIPAddress parameter is valid then the same IP address expressed as a 32-bit number in network byte order is returned. In all other cases 0 is returned.

Example usage:

This example sends a string to port 5000 of IP address 192.168.0.100, using FreeRTOS_inet_addr() to convert the IP address from a string to the necessary 32-bit format. The socket is passed in as the function parameter, and is assumed to have already been created using a call to FreeRTOS_socket(). If ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND is not set to 1 in FreeRTOSIPConfig.h, then the socket is also assumed to have been bound to a port number using FreeRTOS_bind().


/* FreeRTOS+UDP sockets include */
#define "FreeRTOS_sockets.h"

void aFunction( xSocket_t xSocket )
{
struct freertos_sockaddr xDestinationAddress;
const int8_t *pcMessageToSend = "String being sent";

    /* Generate the destination address. */
    xDestinationAddress.sin_addr = FreeRTOS_inet_addr( "192.168.0.100" );
    xDestinationAddress.sin_port = FreeRTOS_htons( 5000 );
	
    /* Send the message. */
    iReturned = FreeRTOS_sendto(
                                    /* The socket being send to. */
                                    xSocket,
                                    /* The data being sent. */
                                    pcMessageToSend,
                                    /* The length of the data being sent. */
                                    strlen( pcMessageToSend ),
                                    /* ulFlags with the FREERTOS_ZERO_COPY bit clear. */
                                    0,
                                    /* Where the data is being sent. */
                                    &xDestinationAddress,
                                    /* Not used but should be set as shown. */
                                    sizeof( xDestinationAddress )
                               );
}
						
Example use of the FreeRTOS_inet_addr_quick() API function


[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ FreeRTOS+ Sitemap ]    [ Main FreeRTOS Sitemap ]    [ ]


Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.